Printing and die-cutting
Flexo Printer Slotter Die-Cutter Folder Gluer Inline
自动高速印刷折叠粘箱机联动线
Prints, slots, die-cuts, folds and glues in one pass, so a finished glued box leaves the line without manual handling.
- Vacuum transfer keeps the board steady through every unit
- Glue spray head imported from Iwata, Japan
- Order memory with automatic order change
- Print and gluing sections run in differential linkage, board gap 5–10 cm
- Three-line pre-crease in the folding section for accurate folds
| Model | 920 | 1224 | 1228 |
|---|
| Max. speed (sheets/min) | 300 | 250 | 220 |
|---|
| Max. feeding size (mm) | 900 × 2000 | 1200 × 2400 | 1200 × 2800 |
|---|
| Min. feeding height (mm) | 300 | 350 | 350 |
|---|
| Min. fold size (mm) | 240 × 110 | 250 × 110 | 250 × 110 |
|---|
| Board | E to AB flute | E to AB flute | E to AB flute |
|---|
HD High-Speed Printer Slotter Die-Cutter with Dryer
高清高速印刷干燥模切机（真空吸附传送）
Vacuum-transfer printing for sharp, high-definition box graphics, with drying, slotting and rotary die-cutting in line.
- 20CrMnTi transmission gears, ground and hardened above HRC 60
- Keyless couplings keep print registration accurate over years of use
- Automatic zero setting and reset
- Units open and close electrically, with a warning alarm while moving
- Independent control desk stores repeat orders for quick changeover
| Model | 1224 | 1228 | 1624 | 1628 | 1632 |
|---|
| Max. speed (sheets/min) | 250 | 230 | 180 | 180 | 180 |
|---|
| Max. feeding size (mm) | 1200 × 2500 | 1200 × 2900 | 1600 × 2400 | 1600 × 2800 | 1600 × 3200 |
|---|
| Min. feeding size (mm) | 350 × 600 | 350 × 600 | 450 × 600 | 450 × 600 | 450 × 600 |
|---|
| Max. printing area (mm) | 1200 × 2400 | 1200 × 2800 | 1600 × 2400 | 1600 × 2800 | 1600 × 3200 |
|---|
| Standard plate thickness (mm) | 7.2 | 7.2 | 7.2 | 7.2 | 7.2 |
|---|
| Max. slot depth (mm) | 300 | 300 | 400 | 400 | 400 |
|---|
Lead-Edge Feed Flexo Printer Slotter Rotary Die-Cutter
高速水墨印刷开槽模切机（前缘送纸）
A dependable lead-edge feeder line for everyday RSC boxes and die-cut cartons, with an optional slotting section.
- PLC adjusts print and die-cut phase from the panel
- Carburized, quenched and ground main gears for stable, long-life running
- Ratchet plate hanging with one-side lock, 10 mm hanging strip
- Slotting knives can mount on the die roll, saving plate cost on plain slotted boxes
| Model | 1020 | 1224 | 1424 |
|---|
| Max. speed (pcs/min) | 150 | 150 | 150 |
|---|
| Economic speed (pcs/min) | 120 | 120 | 120 |
|---|
| Max. board size (mm) | 950 × 2200 | 1400 × 2400 | 1400 × 2600 |
|---|
| Min. board size (mm) | 260 × 500 | 350 × 800 | 350 × 800 |
|---|
| Max. printing area (mm) | 950 × 2000 | 1300 × 2200 | 1300 × 2400 |
|---|
| Max. slot depth (mm) | 240 | 300 | 300 |
|---|
SYKM Auto Printing Slotter Die-Cutter
SYKM 型自动印刷开槽模切机
A value-focused printer slotter for plants moving up from semi-automatic equipment, handling board from 2 to 11 mm.
- Drive gears hardened and ground above HRC 60
- All clearances adjust manually or electrically
- Chrome-plated rolling shafts
- Optional PLC touchscreen with order memory and auto reset after plate washing
| Model | SYKM300 | SYKM405 | SYKM420 | SYKM480 |
|---|
| Roller diameter (mm) | ø300 | ø405 | ø420 | ø480 |
|---|
| Max. feeding size (mm) | 950 × 2300 | 1270 × 2500 | 1300 × 2500 | 1500 × 2500 |
|---|
| Max. printing area (mm) | 850 × 2100 | 1150 × 2300 | 1200 × 2300 | 1400 × 2300 |
|---|
| Min. feeding size (mm) | 260 × 650 | 350 × 650 | 380 × 650 | 400 × 650 |
|---|
| Board thickness (mm) | 2–11 | 2–11 | 2–11 | 2–11 |
|---|
| Economic speed (pcs/min) | 100 | 100 | 100 | 100 |
|---|
Folding, gluing and stitching
Automatic Folder Gluer Stitcher
全自动粘钉一体机
Glues or stitches 3-ply and 5-ply boxes on one machine, with servo-driven stitching at 1,000 stitches per minute.
- Stores up to 1,000 orders; size change in 3–5 minutes
- Servo-driven stitching head
- Lead-edge belt feeding keeps boxes square
- Single, double and reinforced stitching in one pass
- Automatic counting and stacked output
| Model | 2000 | 2200 | 2400 |
|---|
| Max. board size (mm) | 900 × 2000 | 950 × 2200 | 1000 × 2400 |
|---|
| Min. board size (mm) | 360 × 1000 | 360 × 1000 | 360 × 1000 |
|---|
| Stitching speed | 1000 stitches/min | 1000 stitches/min | 1000 stitches/min |
|---|
| Stitch wire | No. 17, 18 | No. 17, 18 | No. 17, 18 |
|---|
| Board | 3 and 5-ply | 3 and 5-ply | 3 and 5-ply |
|---|
SDJ Semi-Automatic Stitcher (Two-Piece)
SDJ 型半自动钉箱机（双片式）
Stitches one-piece, two-piece and irregular boxes, including large cartons and boxes without lids.
- Electric size change in 2–3 minutes
- Stitch pitch set by computer, 30–120 mm
- Single, double and reinforced stitching
- Automatic counting with bundled output
Ask for a price
Semi-Automatic Box Stitching Machine
半自动钉箱机
Easy to run with no prior experience, with a size change in about one minute.
- Single, double and reinforced stitching
- Automatic counting, output bundled
| Model | All sizes |
|---|
| Max. size (mm) | 2460 × 1515 |
|---|
| Min. size (mm) | 606 × 300 |
|---|
| Feeding height (mm) | 900 |
|---|
| Speed | 400 stitches/min |
|---|
| Stitch pitch (mm) | 30–120 |
|---|
ZXJ-2800 Semi-Automatic Folder Gluer
ZXJ-2800 型半自动粘箱机
Folds and glues all kinds of corrugated board. Operators need no special training, and a new order is set up in a minute.
- Minimum box glue width about 260 mm
- One-minute order change
Ask for a price
Laminating
TM-F Vacuum Semi-Automatic Flute Laminator
TM-F 系列真空吸附式半自动贴面机
Suction belt transport stops corrugated board from arching, giving flat, accurate lamination at high speed and low noise.
- Bottom-sheet feeding for exact positioning
- Front-edge or in-phase alignment, chosen to suit the job
Ask for a price
Also available: automatic waste stripping and stacking machine, automatic feeder, automatic flatbed die-cutter, bundling machine, thin-blade slitter scorer, pressure-type semi-automatic gluer, automatic push-feed stitcher and DXJ stitcher series.
